Dropped Spindles For Disc Brakes AC4061 >

Dropped Spindles For Disc Brakes
Dropped Spindles For Disc Brakes Dropped Spindles For Disc Brakes Dropped Spindles For Disc Brakes

Dropped Spindles For Disc Brakes >

SSP Product

Part Code: AC4061


Availability: Only 5 remaining



Dropped spindles for use with front 4x130 disc brakes on Balljoint suspension models. The standard disc brake backing plates can't be run with these dropped spindles. They lower the vehicle by 2.5 inches and increase the track by 1/2 inch per side. The track increase can cause problem if you are running wide front wheels


Good Quality


For pre 1968 model, the inner bearing will need replacing with 311-405-625\/E and inner tie rod ends with 311-415-811\/C and 311-415-812\/C


Lowers by 2.5'', increases the track 1/2'' per side.


7.7000 kg

For Vehicles

Beetle 1966-1979 | Beetle Cabrio 1966-1970 | Karmann Ghia 1966-1974

Product Questions

Sort by ASC
Will these fit a 1970 1500 with factory disc brakes? will I need any additional parts ... (bearings etc) or is the rest just a swap over?
Question by: Scott Quinn on 3 Aug 2019 12:24:00
Yes, these will be correct for your Ball Joint set up. These utilize standard bearings, hub seals etc.
Answer by: Nick Bitton (Admin) on 5 Aug 2019 09:05:00
is the price for pair or one side?
thank you
Question by: Sash on 10 Sep 2018 05:14:00
It is for a pair
Answer by: Ben Pascoe (Admin) on 10 Sep 2018 08:08:00
Will this one work on a standard 1973 bay window with front discs and balljoints? Thanks
Question by: M.S. on 10 Nov 2018 18:17:00
They won't. You will need AC405310
Answer by: Ben Pascoe (Admin) on 12 Nov 2018 08:41:00
If fitting dropped spindles, what Brake Disc backing plate is required?
Question by: sam on 25 Sep 2017 12:03:00
Backing plates aren't used with these spindles
Answer by: Ben P (Admin) on 25 Sep 2017 12:22:00