Front adjustable axle beam. This is a ball joint beam to fit left hand drive models. It is supplied as a bare beam with only needle bearings and bushes fitted. it will require torsion leaves and seals.
This beam has 45 degrees of downward adjustment and will require long travel ball joints for its lowest setting
This can be converted for use on right hand drive. You will need to remove and re weld the steering damper mount and purchase AC4013840 which is a right hand drive steering box stop
The beam must be greased thoroughly before use
Standard beams measure 30 inches weld to weld
Beetle 1966-1979 | Beetle Cabrio 1965-1979 | Karmann Ghia 1966-1974
If so, if the adjuster is put at full adjustment, how low will it be compared to stock?