E10 Fuel Hose Kit for Twin Carburettors AC127001 >

E10 Fuel Hose Kit for Twin Carburettors

E10 Fuel Hose Kit for Twin Carburettors >

Goodridge Uk Product

Part Code: AC127001


Availability: Only 2 remaining



Fuel hose kit, This fuel hose kit is designed to replace your fuel line between the tank, pump and carb. This kit is designed for a twin carb vehicle, Please see AC127000 for single carb kit.

The kit consist of:
3 Metres of 5.5mm top quality Goodridge fuel hose,
1 x 113-127-521/A the metal fuel pipe through the bulk head in the engine bay,
1 x 171-971-913 grommet for this metal pipe,
1 x 251-201-511/G in line fuel filter (recommended to be fitted under the vehicle and not in the engine bay),
1 x AC129434402 brass t piece
15 x N02-452-81 top quality stainless fuel hose steel clamps (not jubilee clips).

The Goodridge fuel hose in this kit is synthetic nitrile rubber hose internally re-enforced with stainless steel and covered with fibre over braiding.
Nitrile hose it is fully compatible with modern E10 fuel (Petrol with 10% Bio-Ethanol) and rated to deal with far greater percentages .
This is the perfect kit for anyone worrying about modern fuels and fuel hose issues and will give you piece of mind and longevity of service.


Top Quality


0.1740 kg

For Vehicles

Beetle 1950-1979 | Beetle Cabrio 1950-1979 | Karmann Ghia 1960-1974 | T2 Bay 1968-1979 | T2 Split 1950-1967 | Type 3 1962-1973

Product Questions

Is there enough hose in this kit to replace the line from the fuel tank to the chassis tube (approx 12" or 30cm)
Question by: Paul Davies on 25 Mar 2019 15:57:00
3 metres of hose is supplied which should be sufficient.
Answer by: Ben Pascoe (Admin) on 25 Mar 2019 16:04:00