Long arm sink cover/table brackets for a Westfalia interior. These are supplied as a pair with the fixing screws.
They are made almost identical to the original hinges, so they can be used directly as the replacement for your old ones. We have used slightly thicker steel to make these hinges stronger than the originals as we know the original hinges are sometimes slightly a bit flimsy. (The original hinges are made of 1.6mm metal sheet and our reproduced hinge is 1.7mm.)
We did drill the hole on the longer arm side but only made the 2 small screw holes ready for you to drill through. The only reason for this is it will be more accurate for the you to drill 1 hole on the longer arm side after it has been pushed into the slot of the table edge. These hinges measure 30mm wide and 45mm high when fitted.