|  | Can't find what you need on the website?
Please call to check availability: 0845 873 8328 (LOCAL RATE) NOS Type 4 Engines
A truly incredible find! Fresh out of the crate, these are complete UNUSED 1800cc Industrial engines, easily converted for use in vehicles. Stockpiled for decades and unopened until now. Supply of these units is exclusive to VW Heritage and strictly limited. Don´t miss out on this rare opportunity.
 | NOS Type 4 engines | |
Engine, Type 4 1800cc, NEW Complete. Ex-industrial, Gen VW
[022-100-011/J]
[IN STOCK]
|
£
2,350.00
|
|
| |
Crankcase
 | Head stud | |
2
Stud, Cylinder Head (175mm) 1.9-2.1 = 4 req'd / T4 = 8 req'd
[025-101-143/B]
[IN STOCK]
|
£
14.50
|
| Top - 175mm | |
3
Stud, Cylinder Head (222mm) T4 & 1.9-2.1 Litre (8 required)
[025-101-143]
[IN STOCK]
|
£
14.50
|
| Bottom - 222mm | |
Nut,cylinder head,10mm
[021-101-457]
[IN STOCK]
|
£
0.82
|
| Head nut | |
Washer, Cyl. head nut,10mm
[N01-152-711]
[IN STOCK]
|
£
0.61
|
| Head nut washer | |
4
Nut for T4 case through-bolt, 6 required
[021-101-131/E]
[SPECIAL ORDER]
|
£
3.02
|
| Through bolt nut | |
5
Washer for T4 case through bolt 12 required
[021-101-129]
[SPECIAL ORDER]
|
£
4.03
|
| Through bolt washer | |
Bolt M6 x 10, various applications
[N90-529-301]
[IN STOCK]
|
£
0.41
|
| Secondary sump plate bolt | |
7
Core plug,cam/crankcase, 8/55-
[113-101-157/C]
[IN STOCK]
|
£
0.72
|
| Cam end plug | |
8
Dowel pin, main bearings
[111-101-123]
[IN STOCK]
|
£
0.82
|
| Main bearing dowel pin, 5 required | |
| | Sump plug | |
9
Sump plug M12x1.5. CHECK SIZE! SOME T4 UNITS USE N02-970-12
[171-941-550]
[IN STOCK]
|
£
5.05
|
| M12 | |
9
Sump Plug M14x1.5 (WBX & Later T4)
[N02-970-12]
[IN STOCK]
|
£
2.00
|
| m14x1.5, Late T4 | |
| | Engine mounting studs | |
10
Engine mounting stud,lower (NOT Type 2 1976> ) M10x82
[N01-452-51]
[BACK ORDER]
|
£
3.02
|
| >1975, 85mm | |
10
Stud T2 1976> lower engine/gearbox
[N01-467-52]
[IN STOCK]
|
£
4.03
|
| 1976>, 97mm | |
Engine mount nut
[N01-101-011]
[IN STOCK]
|
£
0.61
|
| Engine mounting nut, lower, M10 | |
Washer, Spring, 10x21x1 Axle bolts & Engine bolts
[N01-223-07]
[IN STOCK]
|
£
0.61
|
| Spring washer, 10mm, general use | |
| |
 | Sump plate, centre of base | |
12
Oil strainer, Type 4 1.7-
[021-115-175]
[BACK ORDER]
|
£
6.64
|
| Oil strainer | |
13
Nut for strainer cover T4
[021-115-193/B]
[IN STOCK]
|
£
3.57
|
| Nut for sump plate | |
14
Oil change gasket set, T2/T4
[021-198-031/B]
[IN STOCK]
|
£
1.82
|
| Oil change gasket set | |
15
Oil filter, Type 2/4, 1.7-2.0
[021-115-351/A]
[IN STOCK]
|
£
6.07
|
| Oil filter | |
16
Gasket oil filter mount T4
[021-115-359/A]
[IN STOCK]
|
£
3.02
|
| Oil filter mount gasket | |
| | Oil pressure piston | |
17
Oil relief piston 76> T4 & WBX 22mm x 16mm (+can use on CT)
[021-115-411/A]
[IN STOCK]
|
£
6.64
|
|
| | Oil pressure relief spring | |
19
**NLA** Screw cover,oil relief, T4+WBX
[025-115-431]
[BACK ORDER]
|
£
8.12
|
| Screw plug | |
20
Washer,oil relief valve,T4+WBX
[N01-382-93.]
[IN STOCK]
|
£
2.00
|
| Seal washer | |
21
Gasket,Oil Breather,T2 1.7-2.0 (up to '79)
[021-115-487]
[IN STOCK]
|
£
4.03
|
| Breather to case gasket >1979 | |
22
Dipstick bellows T2 1.7-2.0L
[021-119-245]
[IN STOCK]
|
£
5.05
|
| Dipstick bellows | |
23
Cap ,Oil Filler, 1.7-2L A/C, CT, Water boxer.
[070-115-311]
[IN STOCK]
|
£
7.10
|
| Oil cap | |
24
Oil Filler pipe upper, 1.7-2.0 supplied with cap and clip
[021-115-317/A]
[IN STOCK]
|
£
16.30
|
| Oil filler neck/cap | |
| |
Engine Mounts
Crankshaft and Flywheel
 | Crankshaft & Components 2.0 Aircooled (CU Engine) | |
| |
25
Pin for flywheel location.
[N01-330-91]
[IN STOCK]
|
£
1.02
|
|
26
Woodruff key,timing gear,All
[111-105-213]
[IN STOCK]
|
£
4.03
|
|
28
Spacer between gears on crank
[113-105-219]
[IN STOCK]
|
£
5.05
|
|
29
Gear,distributor drive, 12/47-
[113-105-223]
[BACK ORDER]
|
£
25.50
|
|
30
Lock ring, dist. drive, 12/47-
[111-105-227]
[IN STOCK]
|
£
3.02
|
|
31
Crank oil seal, pulley,1.7-2.0
[021-105-247/A]
[IN STOCK]
|
£
4.03
|
| Reproduction | |
32
Woodruff key T4 crank, small
[N01-270-82]
[IN STOCK]
|
£
2.55
|
|
O-ring for fan hub,
[021-119-125/A]
[IN STOCK]
|
£
2.00
|
|
33
Spring for distributor drive
[111-105-233]
[IN STOCK]
|
£
2.55
|
|
34
Shim, distributor drive shaft T4 1.7 -2.0
[021-105-235]
[IN STOCK]
|
£
3.02
|
| Washer for distributor drive, 1 required | |
| | Flywheel oil seal | |
35
Oil seal, flywheel,1.7-2.0 VW & T25 WBX 1.9-2.1
[029-105-245/GEN]
[IN STOCK]
|
£
21.41
|
| Genuine | |
35
Oil seal, flywheel, T2 1.7-2.0 & T25 WBX 1.9-2.1
[029-105-245/B]
[IN STOCK]
|
£
4.03
|
| Reproduction | |
36
Flywheel bolt washer T4
[021-105-275]
[IN STOCK]
|
£
2.55
|
|
| | Flywheel shims | |
37
Shim, end float, 0.24mm T4+WBX
[021-105-291]
[IN STOCK]
|
£
7.10
|
|
37
Shim, end float, 0.30mm T4+WBX
[021-105-281]
[IN STOCK]
|
£
7.10
|
|
37
Shim, end float, 0.32mm T4+WBX
[021-105-283]
[BACK ORDER]
|
£
7.10
|
|
37
Shim, end float, 0.36mm T4+WBX
[021-105-287]
[IN STOCK]
|
£
7.10
|
|
37
Shim, end float, 0.38mm T4+WBX
[021-105-289]
[IN STOCK]
|
£
7.10
|
|
| | Flywheel bolts | |
38
Bolt, Flywheel, T4 manual (5 req)
[N01-433-51]
[BACK ORDER]
|
£
4.03
|
| Flywheel bolt, T4 manual, 5 requiried | |
39
Felt seal ring
[021-105-311]
[IN STOCK]
|
£
2.00
|
|
40
Needle Bearing, end of crank, T4/WBX (+T1 Flywheel Nut)
[111-105-313/A]
[IN STOCK]
|
£
2.55
|
| Needle bearing for crankshaft | |
41
Nut, con rod, 1300cc> each
[113-105-427]
[IN STOCK]
|
£
3.02
|
|
| | Crankshaft, Reground/Exchange | |
42
Crankshaft 1.7/1.8 T4, re-con Inc £25+vat exch surcharge
[021-105-101/X]
[IN STOCK]
|
£
134.82
|
| 1700cc - 1800cc | |
42
Crankshaft 2.0 T4, re-con Inc £50+vat exch surcharge
[039-105-101/AX]
[BACK ORDER]
|
£
166.50
|
| 2000cc | |
| | Con rods, Reconditioned/Exchange | |
43
Conrods T4 1.7/1.8 rebuilt 4pc inc £50+vat Exch.Surch
[022-105-401]
[SPECIAL ORDER]
|
£
196.12
|
|
| |
44
O-ring for flywheel T4 1.7-2.0
[021-105-279]
[IN STOCK]
|
£
2.00
|
| O ring in flywheel | |
45
Small end bush T4, set of 4
[021-105-431/A]
[BACK ORDER]
|
£
11.19
|
| Small end bushes | |
| |
Engine Bearings
 | Engine bearings | |
| | Big End Bearings | | 1700cc / 1800cc | |
45
Con rod bearings,stnd, 1.7-1.8
[021-105-701/A]
[IN STOCK]
|
£
14.25
|
| Standard | |
45
Con rod bearings,+.25, 1.7-1.8
[021-105-707/A]
[IN STOCK]
|
£
14.25
|
| 0.25 | |
45
Con rod bearings,+.50, 1.7-1.8
[021-105-713/A]
[IN STOCK]
|
£
14.25
|
| 0.50 | |
45
Con rod bearings,+.75, 1.7-1.8
[021-105-719/A]
[IN STOCK]
|
£
17.32
|
| 0.75 | |
| | Big End Bearings | | 2000cc | |
46
Big end bearings, T4 2.0, std
[039-105-701]
[IN STOCK]
|
£
21.41
|
| Standard | |
46
Big end bearings, T4 2.0, 0.25
[039-105-707]
[BACK ORDER]
|
£
21.41
|
| 0.25 | |
46
Big end bearings, T4 2.0, 0.50
[039-105-713]
[IN STOCK]
|
£
21.41
|
| 0.50 | |
46
Con rod bearing set 2.0 +0.75
[039-105-719]
[SPECIAL ORDER]
|
£
26.52
|
| 0.75 | |
| | Main Bearings | | 1700cc - 2000cc. Some line bore sizes available. Please call | |
47
Main bearing set, std/std/std 1.7-2.0
[021-198-481/A]
[BACK ORDER]
|
£
49.00
|
| Standard | |
47
main bearing set, 0.25/std/std 1.7-2.0
[021-198-483/A]
[IN STOCK]
|
£
38.78
|
| 0.25 | |
47
Main bearing set, 0.50/std/std, 1.7-2.0
[021-198-485/A]
[IN STOCK]
|
£
38.78
|
| 0.50 | |
47
Main bearing set, 0.75/std/std, 1.7-2.0
[021-198-487/A]
[IN STOCK]
|
£
37.75
|
| 0.75 | |
| | Camshaft bearings | |
Cam bearing set, std, 1.7-2.0
[021-198-541]
[IN STOCK]
|
£
11.19
|
|
| |
Can't find what you need on the website?
Please call to check availability: 0845 873 8328 (LOCAL RATE) |
