Retainer, valve spring, 1.7-2.0 021109641B
Part information
Description
Valve spring retainer (each)
Quality
Good quality reproduction.
Fitting Info
This is a special order item. We advise that upon disassembly, you check all the valve springs, retainers and all components in the cylinder head, for excessive wear and or damage and replace as necessary.
Metrics
Weight: 0.0220 kg
For Vehicles
Type 4 engine 1.7 - 2.0 litre.
Other parts that may also be of interest
Valve collet, 1.2-1.6, 6/59-, T25 WBX & Diesel, Each
Adjusting screw,valve,1.8-2.0 2.1DJ,1.9DG 89-, 10mm,NOT 1.7!
Pushrod seal, 1.7-2.0, large 25.1 dia, tube to head
Exhaust valve, 1800cc, 34mm* [50]
Valve Spring, Type4 1.7-2.0
Cam shaft, Type 4 Mechanical Std. (No Cam Wheel)
Push rod tube 1.7-2.0 Aircooled
Cam follower Hydraulic Type 4/WBX & CT engine
Retaining wire, push rods tube 1.7-2.0
Nut, 8mm valve adjuster+general use
Nut for 10mm valve adjusting screw
Cam follower 1.7-2.0 Type4 engine 72-78
Inlet valve, 2.0, 8/75-79 (37.5mm)
Pushrod, hydraulic tappets Type 4
Exhaust valve, 1.7-2.0, 33mm [10]
Valve screw, Best Quality ,1.2-1.6, 8/60-, 8mm
Pushrod seal, 1.7-2.0, small, between tube & case
Valve Guide, Inlet, Type 4 Engine [30]
Valve guide, exhaust, 9mm
Inlet valve, 1.7 & 1.8 8/74-> (39.3mm x 8mm Stem)