Air filter, T2 '75->, 1.6-2.0 & some WBX (Square [10] 021129620
Part information
Description
Air filter. To fit 1600-2000cc T2 engines and some Waterboxer engines. Square, 58mm deep.
(Note: this is NOT for Industrial 127 engines or '74 Injection - use 039-129-620/A)
Quality
Good quality reproduction
Metrics
Weight: 0.3250 kg
58mm deep
For Vehicles
T2 / Baywindow 75-79
T25 80-83
Other parts that may also be of interest
Spring, linkage cup, 2.0 litre aircooled.
Elbow T2 Baywindow 74-79 Auxillary air regualtor
Hose clip for temp regulator [40]
Injection temp sensor T1 75-79, T2 74-78 , T3 70 [10]
Elbow, Inlet 90degree 2.0 A/C
Elbow,Inlet Type4
Valve, Idle Cut Off, 1.7-2.0 - Check Type!
Fuel Pressure regulator, T1 75-79,T2/T25 76-83 2.0 Air/C
Air hose 50 x 500mm, aluminium
Vacuum hose 3mm braided sold per metre [50]
Fuel hose, 5mm cotton braided, per metre
Clip, Axle Gaiter / heater hose, S/steel (40-60mm)
Pre-heat pipe for warm air repro (metal) [20]
Airfilter clip T2 75>
Bracket for carb [30]
Combi relay for fuel injection T1 75-79, T2 74-78,T25 80-83*
Elbow Airfilter / LHS
Bracket for carb [20]
Gaskets, fibre,inlet Type 4 pair
Fuel injection seal,inner