Workshop Equipment
Engine Stands
Aftermarket work bench mounted engine stand for use on all aircooled T1/2/3 and T4 engines. Requires hardware to mount.
- Price
- £38.70
A convenient way to move an engine from & back under the vehicle. The frame is open at one end so you can position the jack for …
- Price
- £53.70
Workshop Tools, Pullers and Locking Tools
Workshop Tools
![Tool, Gastester Digital, For C.O Meausurement [10] - LT4125](http://api.vwheritage.com/_img/small/178677_01_small.jpg)
For adjusting carburettor mixture
- Price
- £140.86
- Was
- £156.50
- You save
- 10%
![Valve Lapping Tool,2 Piece 16,20,27 & 35mm diame [10] - LT3524](http://api.vwheritage.com/_img/small/178394_01_small.jpg)
Tool for lapping valves into cylinder heads
- Price
- £9.46
- Was
- £10.50
- You save
- 10%
Tool for lapping valves into cylinder heads, for attachment to a drill
- Price
- £49.40
For setting your timing, adjustable for ease of use
- Price
- £208.90
Attaches to a spare tyre and brake reservoir automatically forcing fluid through the system for one person brake bleeding
- Price
- £24.70
Pullers
Tool, Ball Joint/Tie rod Seperator, Scissor Type
- Price
- £29.00
Aftermarket crank gear puller. This puller is specially designed to remove the cam gear from the crankshaft.
- Price
- £63.40
![Tool, crankshaft pulley puller [20] - AC000122](http://api.vwheritage.com/_img/small/142453_01_small.jpg)
Aftermarket crankshaft pulley puller. Makes the removal of the crank pulley easy without warping the pulley. This puller cannot be …
- Price
- £24.07
- Was
- £30.10
- You save
- 20%
Oil piston puller for the removal of seized or reluctant oil pressure relief valve pistons from the engine case
- Price
- £31.20
Aftermarket spring plate removal tool. A handy tool for taking the tension from the spring plate when removing and fitting spring …
- Price
- £40.80
Aftermarket distributor drive puller. The tool allows removal of the distributor drive without splitting the crankcase.
- Price
- £36.50
Aftermarket oil pump puller. The puller prevents damage to the pump or crankcase when removing the pump. Good quality
- Price
- £9.40
Locking Tools and Helpers
![Tool, flywheel lock [10] - AC000111](http://api.vwheritage.com/_img/small/117744_01_small.jpg)
Flywheel lock tool for 6 and 12 volt flywheels. All tools are non-returnable.
- Price
- £7.20
- Was
- £8.00
- You save
- 10%
Crankcase splitter tool that fits into the oil pump recess. All tools are non-returnable
- Price
- £16.10
3/4'' Drive T-Bar.Fabricated in chrome vanadium for extra strength and durabilty. Perfect for moving tight fixings such as flywheel …
- Price
- £33.30
Aftermarket deluxe flywheel oil seal press tool for T1 based engines, not T4.
- Price
- £35.50
Clutch alignment tool. Takes the guess work out of aligning the friction plate.
- Price
- £3.50
The helping hand is a must have tool to ease the removal of extremely tight fixings. Ideal for removing drums and flywheels. Simply … [Read more]
- Price
- £35.50
Aftermarket Mr Torque tool kit. This kit multiplies leverage from a normal ratchet. The tool is for use on flywheel gland nuts with … [Read more]
- Price
- £107.10