VW T25 Waterboxer Engine Crankshafts & Flywheel
Watercooled 1900cc & 2100cc Crankshaft Parts

Crankshafts
Crankshaft 1.9 Boxer, Reground (0.25) inc £50+vat Exch S/Chg 025105101AX MORE INFO
Re-ground Crankshaft for 1.9 Waterboxer engines.
- Price
- £210.00
Timing Gear Parts
Pin for flywheel location. N0133091 MORE INFO
Pin, flywheel location 1.7-2L (T2) Pin, flywheel location CU & water boxer engine (T25)
- Price
- £1.70
Timing gear, crankshaft, 8/60- 113105209 MORE INFO
The Steel gear on the crankshaft which drives the camshaft. (Not for 30hp or Type4 engines)
- Price
- £19.30
Woodruff key,timing gear 111105213 MORE INFO
Spacer between gears on crank 8/60- 113105219 MORE INFO
The spacer between the two gears on the crankshaft. (Not for 30hp engines)
- Price
- £6.10
Distributor Drive Parts
Gear, brass distributor drive, 12/47- 113105223 MORE INFO
Brass gear on the crankshaft which drives the distributor.
- Price
- £30.10
Lock ring, dist. drive 111105227 MORE INFO
The locking ring for the distributor drive gear on the crankshaft.
- Price
- £3.90
Drive shaft, distributor 113105231B MORE INFO
Spring for distributor drive [50] 111105233 MORE INFO
Shim, distributor driveshaft (0.6mm), 2-required 111105235A MORE INFO
Distributor driveshaft shim. Each. 2 Required per engine.
- Price
- £2.80
Flywheel Oil Seals
Oil seal, flywheel, T2 1.7-2.0 & T25 WBX 1.9-2.1 029105245B MORE INFO
Flywheel main oil seal for 1700-2000cc T4 engines and 1900-2000cc Wasserboxer engines
- Price
- £9.90
Flywheel main oil seal for 1700-2000cc T4 engines and 1900-2000cc Wasserboxer engines
- Price
- £12.78
- Was
- £14.20
- You save
- 10%
Retainer ring behind Flywheel Seal (WBX), 86-> 025105283 MORE INFO
Retainer Ring behind Flywheel Seal for Waterboxer engines ('86- with 3 piece thrust bearing).
- Price
- £8.30
End Float Shim for 1.7-2.0 Type4 and 1.9-2.1 Waterboxer engines. 0.24mm.
- Price
- £9.00
End Float Shim for 1.7-2.0 Type4 and 1.9-2.1 Waterboxer engines. 0.30mm.
- Price
- £9.50
End Float Shim for 1.7-2.0 Type4 and 1.9-2.1 Waterboxer engines. 0.32mm.
- Price
- £9.50
End Float Shim for 1.7-2.0 Type4 and 1.9-2.1 Waterboxer engines. 0.34mm.
- Price
- £8.80
End Float Shim for 1.7-2.0 Type4 and 1.9-2.1 Waterboxer engines. 0.36mm.
- Price
- £8.30
End Float Shim for 1.7-2.0 Type4 and 1.9-2.1 Waterboxer engines. 0.38mm.
- Price
- £9.50
End float shim, 0.40mm, for main bearing for Waterboxer engines ('86- with 3 piece thrust bearing). 1 Required always
- Price
- £8.30
Seal, Crankshaft, pulley end 1.9-2.1 Litre (rear of vehicle) 025105247A MORE INFO
Crankshaft pulley seal (rear of vehicle) on 1.9-2.1 Litre Waterboxer engines. [Non-Syncro models only, but can be used on Syncro if …
- Price
- £5.50
Spring washer,pulley bolt,GEN 111105259 MORE INFO
Bolt, Flywheel, water boxer (5 req) N90226801 MORE INFO
Bolt for Flywheel/Drive Plate (5 req). Use on all T25 Waterboxer engines, or T2/T25 Type4 engines with Automatic gearbox
- Price
- £5.40
O-ring for flywheel, Type4 1.7-2.0 & WBX 1.9-2.1 021105279 MORE INFO
O-ring for flywheel. For 1700-2000cc Type 4 engines and 1.9/2.1 Waterboxer engines
- Price
- £2.80
Thrust washer behind bearing shims (WBX) 86-> 025105635 MORE INFO
Thrust washer for behind the bearing shims for Waterboxer engines ('86- with 3 piece thrust bearing). 2 Required - 1 either side of …
- Price
- £25.60
Felt seal ring 021105311 MORE INFO
Needle Bearing, end of crank, Type 4/WBX (+T1 Flywheel Nut) 111105313A MORE INFO
Needle Bearing. To fit the end of the crankshaft on T4 and Waterboxer engines. Also fits T1 flywheel gland nuts.
- Price
- £7.20
Torque conv. drive plate for 1.7-2.0 Type 4 & 1.9-2.1 022105323D MORE INFO
Torque convertor drive plate for 1.7-2.0 Type4 & 1.9-2.1 Waterboxer engines (use instead of Flywheel when mating engine to Automatic …
- Price
- £208.90