 |  | Can't find what you need on the website?
Please call to check availability: 0845 873 9960 (LOCAL RATE) Exhaust Systems
Select manufacturer
Jetex Exhaust Sytems
All Jetex exhausts, whether made from stainless or aluminised steel, offer the same quality build and performance characteristics.
Absorption Design Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in back pressure. Jetex silencers have no baffles. Instead noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.
Mandrel Bends
It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are Mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.
Rolled Tailpipes
Most Jetex tailpipes are made from stainless steel with rolled in ends. In some cases there are damping inserts to ensure that a 'sporty' rather than 'raspy' note is producced by the exhaust.
Perfect Fitting
Jetex exhausts are made to fit a specific application. In house jigs ensure exact replication of the prototype. All systems are supplied with a free fitting kit.
Back to top
 | MK1 Golf | |
Exhaust Sys,Jetex,Single Oval 70/90MM,G1 >83/Sci Mk1*
[WC253J29-H5] |
£215.41 | | MK1 Golf, Upto 1983, Oval Tailpipe, 70-90mm | |
Exhaust System,Jetex,80mm Round,Golf Mk1 Cab/Sci Mk2*
[WC253J29-H2] |
£199.69 | | MK1 Golf Cabriolet, All Models, Single Round 80mm Tailpipe | |
Exhaust Sys,Jetex,Single Round 80MM G1>83/Sci mk1 *
[WC253J29-H] |
£194.07 | | MK1 Golf, Upto 1983, Single Round 80mm Tailpipe | |
Exhaust system, Jetex, Racing Mk1 Golf >83, Stainless 80mm*
[WC253JT29-H6R] |
£288.70 | | MK1 Golf, Racing system, Stainless steel, 80mm tailpipe | |
| | MK2 Golf | |
*SO*Exhaust Sys,Jetex, Twin Round 80mm,G2 8V >92 S/S*
[WC253J31-H2R] |
£314.23 | | MK2 Golf 8v, Upto 1992, Twin 80mm Tailpipe | |
Exhaust Sys, Jetex, Twin Round 80MM, G2 8V>92*
[WC253J31-H2] |
£232.90 | | MK2 Golf 8v, Upto 1992, Twin 80mm Tailpipe | |
Exhaust Sys, Jetex, Single Oval 70/90MM G2 8V>92*
[WC253J31-H] |
£206.53 | | MK2 Golf 8v, Upto 1992, Oval 70-90mm Tailpipe | |
Exhaust Sys, Jetex, 2 Round 80MM, G2 16V >92,2 box,st/steel*
[WC253J28-HRB] |
£296.45 | | MK2 Golf 16v, Upto 1992, Twin Round 80mm Tailpipe | |
**NCA**Exhaust Sys, Jetex, Twin 70mm, Jetta Mk2, Steel*
[WC253J28-H1] |
£210.94 | | MK2 Golf 16v, G60, Upto 1992, Twin Round 80mm Tailpipe, Stainless Steel | |
Exhaust Sys,Jetex,Twin Round 80MM G2 16V>91, NOT s/s*
[WC253J28-H] |
£264.07 | | MK2 Golf 16v, G60, Upto 1991, Twin Round 80mm Tailpipe, Stainless Steel | |
| |
Back to top
Bastuck Exhausts
The production of sport exhaust systems is Bastucks core business. The long lasting experience in design and manufacture, combined with their know how gained from motor racing, is used for the development of all performance exhaust systems.
As all work procedures take place at Bastucks headquarters in Lebach, they can ensure the highest quality.
Back to top
To create your own 63mm, stainless steel exhaust system, please choose 1 item from sections 1, 2, 3 and 4, then select the appropriate clamps & hangers from sections 6 - 8. For Rear Silencer only, choose 1 item from sections 4, 5 and 1x item 8.
 | For Golf MK1 Cabrio 1984 onwards & Scirocco MK2 | | OE Downpipe to Bastuck Frontpipe adaptors | |
1
Exhaust adapter,Bastuck,42.5mm-63mm,onto downpipe
[WC253BA63A-425VW] |
£19.36 | | 42.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,45.5mm-63mm,onto downpipe*
[WC253BA63A-455VW] |
£19.36 | | 45.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,50.5mm-63mm,onto downpipe
[WC253BA63A-505VW] |
£19.36 | | 50.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,55.5mm-63mm,onto downpipe*
[WC253BA63A-555VW] |
£19.36 | | 55.5mm - 63mm onto downpipe | | Frontpipes | |
2
see WC253BVWG1-1B
[WC253BVW-G1B] |
£197.14 | | Frontpipe with silencer | |
2
Front pipe,Bastuck,Golf Cab/Scirocco Mk2 84>
[WC253BVWG1-1BP] |
£87.82 | | Frontpipe without silencer | | Linkpipe | |
3
Link pipe, Bastuck,Golf Cab/Scirocco Mk2 84>
[WC253BVWG1-2B] |
£112.34 | | Linkpipe | | Rear Silencer | |
4
Rear Silencer,Bastuck,Golf/Cab/Scir Mk1>84, 70mm round
[WC253BVWG1-70S] |
£278.89 | | Single 70mm Tailpipe (style A) | |
4
Rear silencer,Bastuck,Golf/Cab/Scir Mk1>84, 90mm round
[WC253BVWG1-90SI] |
£308.52 | | Single 90mm Tailpipe (style B) | | Rear Silencer Adaptor (to connect OE system to Bastuck Rear Silencer) | |
5
Exhaust adapter,Bastuck 42.5mm-63mm,backbox only*
[WC253BA63-425VW] |
£19.36 | | 42.5mm - 63mm Backbox only | |
5
Exhaust adapter,Bastuck,45.5mm -63mm, backbox only*
[WC253BA63-455VW] |
£19.36 | | 45.5mm - 63mm Backbox only | |
5
Exhaust adapter,Bastuck,50.5mm-63mm, backbox only*
[WC253BA63-505VW] |
£19.36 | | 50.5mm - 63mm Backbox only | |
5
Exhaust adapter,Bastuck,55.5mm-63mm, Backbox only
[WC253BA63-555VW] |
£19.36 | | 55.5mm - 63mm Backbox only | | Clamps & Hangers | | One of each required for a full system | |
6
Exhaust front clamp,Bastuck,Golf/Cab/Scirocco all
[WC253BVWG1-C1] |
£27.53 | | Downpipe to Frontpipe | |
7
Exhaust clamp,Bastuck,all models, stainless steel.
[WC253BSCH63] |
£7.10 | | Frontpipe to Linkpipe | |
7
Exhaust clamp,Bastuck,all models, stainless steel.
[WC253BSCH63] |
£7.10 | | Linkpipe to Rear Silencer | |
| | For MK1 Golf Hardtop Upto 1984 & Scirocco MK1 | | OE Downpipe to Bastuck Frontpipe adaptors | |
1
Exhaust adapter,Bastuck 42.5mm-63mm,backbox only*
[WC253BA63-425VW] |
£19.36 | | 42.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,45.5mm -63mm, backbox only*
[WC253BA63-455VW] |
£19.36 | | 45.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,50.5mm-63mm, backbox only*
[WC253BA63-505VW] |
£19.36 | | 50.5mm - 63mm onto downpipe | | Frontpipe | |
2
Front Silencer,Bastuck,Golf/Cabrio/Scirocco Mk1 >84
[WC253BVWG1-1A] |
£204.30 | | Frontpipe with silencer | |
2
Front pipe,Bastuck,Golf/Cabrio/Scirocco Mk1 >84
[WC253BVWG1-1AP] |
£104.16 | | Frontpipe without silencer | | Linkpipe | |
3
Link pipe,Bastuck,Golf/Cabrio/Scirocco MK1 >84
[WC253BVWG1-2A] |
£112.34 | | Linkpipe | | Rear Silencer | |
4
Rear Silencer,Bastuck,Golf/Cab/Scir Mk1>84, 70mm round
[WC253BVWG1-70S] |
£278.89 | | Single 70mm Tailpipe (style A) | |
4
Rear silencer,Bastuck,Golf/Cab/Scir Mk1>84, 90mm round
[WC253BVWG1-90SI] |
£308.52 | | Single 90mm Tailpipe (style B) | |
4
Rear Silencer,Bastuck,Golf/Cab/Sci Mk1>84,153x95mm
[WC253BVWG1-OVAL] |
£323.84 | | Single Oval 153 x 95 Tailpipe (style C) | |
4
Rear Silencer,Bastuck,Golf/Cab/Sci Mk1>84,2x70mm round
[WC253BVWG1-70T] |
£287.05 | | Twin 70mm Tailpipes (style D) | |
4
Rear Silencer,Bastuck,Golf/Cab/Scir MK1>84, 70mm DTM
[WC253BVWG1-70DTM] |
£311.57 | | Twin 70mm DTM Tailpipes (style E) | |
| | Rear Silencer Adaptor | | To connect OE system to Bastuck Rear Silencer | |
5
Exhaust adapter,Bastuck 42.5mm-63mm,backbox only*
[WC253BA63-425VW] |
£19.36 | | 42.5mm - 63mm, Backbox only | |
5
Exhaust adapter,Bastuck,45.5mm -63mm, backbox only*
[WC253BA63-455VW] |
£19.36 | | 45.5mm - 63mm, Backbox only | |
5
Exhaust adapter,Bastuck,50.5mm-63mm, backbox only*
[WC253BA63-505VW] |
£19.36 | | 50.5mm - 63mm, Backbox only | | Clamps & Hangers | | One of each required for a full system | |
6
Exhaust front clamp,Bastuck,Golf/Cab/Scirocco all
[WC253BVWG1-C1] |
£27.53 | | Downpipe to Frontpipe | |
7
Exhaust clamp,Bastuck,all models, stainless steel.
[WC253BSCH63] |
£7.10 | | Frontpipe to Linkpipe | |
8
Exhaust Clamp,link pipe,Bastuck,Golf/Cab/Scir Mk1>84
[WC253BVWG1-C2] |
£19.36 | | Linkpipe to Rear Silencer | |
| |
For MK2 Golf 1984 - 1992
To create your own 63mm, stainless steel exhaust system, please choose 1 item from sections 1, 2, 3 and 4, then select the appropriate clamps & hangers from section 6. For Rear Silencer only, choose 1 item from sections 4, 5 and 1x item 8.
 | OE Downpipe to Bastuck Frontpipe adaptors | |
1
Exhaust adapter,Bastuck,42.5mm-63mm,onto downpipe
[WC253BA63A-425VW] |
£19.36 | | 42.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,45.5mm-63mm,onto downpipe*
[WC253BA63A-455VW] |
£19.36 | | 45.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,50.5mm-63mm,onto downpipe
[WC253BA63A-505VW] |
£19.36 | | 50.5mm - 63mm onto downpipe | |
1
Exhaust adapter,Bastuck,55.5mm-63mm,onto downpipe*
[WC253BA63A-555VW] |
£19.36 | | 55.5mm - 63mm onto downpipe | | Frontpipe | |
2
Front silencer,Bastuck,Golf Mk2 not syncro*
[WC253BA252-101VW] |
£85.78 | | With silencer | |
2
Front pipe, Bastuck, Golf Mk2 not syncro,
[WC253BA252-100VW] |
£26.52 | | Without silencer | | Linkpipe | |
3
Centre silencer,Bastuck, Golf Mk2 not syncro
[WC253BA252-202VW] |
£191.02 | | With Silencer | |
3
Centre silencer, Bastuck, Golf Mk2 not syncro
[WC253BA252-201VW] |
£75.55 | | Without Silencer | | Rear Silencer | |
4
Rear Silencer,Bastuck,Golf Mk2 exc syncro, 90mm round
[WC253BA252-401VW] |
£242.10 | | Single 90mm Tailpipe (style A) | |
4
Rear Silencer,Bastuck,Golf Mk2 exc 4WD,153 x 95mm oval
[WC253BA252-203VW] |
£279.91 | | Single oval 153 x 95mm Tailpipe (style B) | |
4
Rear Silencer,Bastuck,Golf Mk2 exc 4WD,Twin 76mm round
[WC253BA252-315VW] |
£282.98 | | Twin 76mm Tailpipes (style C) | |
4
**NLA**Rear silencer,Bastuck,Golf Mk2 ex 4WD,Twin 90mm round
[WC253BA252-402VW] |
£314.64 | | Twin 90mm Tailpipes (not shown) | |
4
Rear Silencer,Bastuck,Golf Mk2 exc 4WD,Twin 76mm DTM
[WC253BA252-313VW] |
£266.62 | | Twin 76mm DTM Tailpipes (style D) | | Rear Silencer Adaptor | | To connect OE system to Bastuck Rear Silencer | |
5
Exhaust adapter,Bastuck 42.5mm-63mm,backbox only*
[WC253BA63-425VW] |
£19.36 | | 42.5mm - 63mm backbox only | |
5
Exhaust adapter,Bastuck,45.5mm -63mm, backbox only*
[WC253BA63-455VW] |
£19.36 | | 45.5mm - 63mm backbox only | |
5
Exhaust adapter,Bastuck,50.5mm-63mm, backbox only*
[WC253BA63-505VW] |
£19.36 | | 50.5mm - 63mm backbox only | | Clamps & Hangers | | 3 Required for a full system | |
6
Exhaust clamp,Bastuck,all models, stainless steel.
[WC253BSCH63] |
£7.10 | | Exhaust Clamp | |
| |
Back to top
Can't find what you need on the website?
Please call to check availability: 0845 873 9960 (LOCAL RATE) |
